WARG Annual General Meeting May 2019

WARG’s Annual General Meeting is taking place Monday May 6th 2019, starting at 7:30pm.

The meeting venue is the 1st Pelican Point Sea Scouts facility, located at 12 Australia II Drive, Crawley.

Membership renewals for 2019-20 are also now due. We sincerely thank people for their past WARG membership and invite you to renew again this year.

If you have not already done so, you can direct bank deposit $25 into WARG’s bank account.

WARG’s Bendigo Bank account.
BSB 633000
Account no. 144144953 with “your call sign to identify yourself”.

We thank you for your work and membership this past year, and look forward to seeing everyone at the AGM.

Thanks very much!

73, and Best Regards,

Anthony VK6AXB,
President, WARG

WARG Memberships due

WARG’s membership year ends on 31st of March 2019.

You can renew your membership for 2019-20 by transferring $25 to WARG’s Bendigo Bank account.

BSB 633000 Account no. 144144953 with your call sign to identify yourself.

An email to jah12@bigpond.com saying you have renewed would be appreciated and will bring an acknowledgement.

WARG will be at HARGfest on April 14 to accept renewals and new membership application.

If you use WARG’s repeaters, why not join WARG for $25 and help keep the repeaters on air.

73
John VK6JAH

WARG Repeater Coverage Maps

Just uploaded a new page for repeater coverage maps. At this stage for the Perth Metro area only, but more will follow shortly.

Also going to try and embed a google maps interface so you can zoom in on any sections you wish to see more detail for an area.

You will find the link at the top of the “Repeater” page via the menu. The repeater page has also been upgraded to provide a better view of all repeaters and services in the one place. It also makes it easier to manage from a web site point of view 🙂

Thanks and 73

Carsten

Website Upgrade

Hi all,

Just letting you know that we are in the process of upgrading the website. During this process some links may break, but we hope to have the upgrade completed in the near future.

Thanks for your patience. 73.

WARG Committee for 2018-2019

The WARG Committee for 2018-19 is as follows:

President: Anthony VK6AXB
Vice President: Barry VK6SP
Secretary (Correspondence): Barry VK6SP
Treasurer: John VK6JAH
Membership Officer: John VK6JAH
Technical Officer: Ray VK6ZRW

Committee Members (also called Councillors):
Bob VK6ZGN
Trevor VK6MS
Matt VK6ML (Digital Officer)
Peter VK6PM
Steve VK6VHZ

Webmaster: Carsten VK6PCB
Publicity Officer: (vacant – volunteers wanted!)

Note: As agreed by the AGM, Secretary Barry VK6SP will not be responsible for meeting minutes, each meeting will appoint another WARG volunteer to take the minutes for that meeting.

NEW Meeting Venue from June 2017

Due to some over active white ants, WARG has has to find a new meeting venue. Keeping the link between WARG and the Scouts, we will be metting at the Pelican Point Sea Scouts hall, Australia II Drive, Crawley. This move is until the redevelopment of the Peter Hughes Scout Communication Cenre has been completed. Our firs meeting at the new venue will be the 12th June 2017.

New Venue Map

AGM and Equipment Auction!

A reminder that WARG’s next meeting on Monday May 2nd is our AGM – and will feature an equipment auction at the close of proceedings.

As usual, the main business of the AGM is to elect a new Committee for the coming year. Whilst many of WARG’s office holders intend to re-nominate – including myself as Secretary – this is an opportunity for others who are financial members of WARG and want to contribute more to the running of the group.

WARG’s committee aims to always operate in a collaborative fashion, and not to take over discussions or make decisions which should be the property of the wider group. The AGM is an important night and we look forward to seeing you there, at WARG’s usual meeting venue, the Peter Hughes Scout Communications Centre, corner of Gibbs St and Welshpool Rd, East Cannington.

All are welcome to attend. Doors will be open at 7, for a 7:30 start. Treasurer John will be on hand to take payments from any members who haven’t yet renewed. A short General meeting will also take place, alongside the AGM. Tea & coffee are available, and there’s usually time for socialising before and after the meeting.

WARG Treasurer John VK6JAH advises that the auction is on behalf of the estate of Syd VK6SMH (SK) who sadly passed away last year, his family have asked WARG to assist in disposing of remaining equipment. All the gear is said to be in working order, but the WARG Committee has had no opportunity to fully test any item. As such no warranty can be given regarding the working condition or otherwise of any item offered.

All procedes from the sale of the equipment will go to WARG funds.

Below is a list of the donated equipment and attached are photographs of the same.

Kenwood TS-680S tranceiver with handbook, MC-43S microphone and accessory DIN plugs.

Hi Mound HK-704 morse key

Kenwood LF-30A low pass filter

Kenwood AT-230 antenna tuner with handbook.

Digitor D2510 2m power amplifier.

Yaesu FT-530 dual band handheld with handbook, MH-12 speaker/microphone and DC power cord. Dead battery pack. No charger.

Arista stereo headphones.

Loudspeaker in box.

1981 edition of ARRL handbook.

D-5200 two way PL 259 coax switch.

Micronata swr/power meter.

Asahi Antenna swr/power meter.

Cobra swr/power meter.

Pearce-Simpson Super Cheetah 27MHz AM/SSB CB radio with microphone and handbook.

Benelec 7-706 power microphone.

HF two section tapped helical mobile whip 80-40-20-15-10m in cloth bag. No spring base.

Mast – two section crank up/tilt over. Bottom section triangular lattice, upper galvanised pipe. Probably 14 meters fully extended. With all guy wires and extra section of triangular mast. Includes Alinco EMR-400 rotator and control box with handbook and 3 element tri-band 20-15-10m trapped beam. Two winches, one for tilt over, one for crank up. These items to be sold as a single lot. Removal needed from rear garden of a house in Manning. WARG can assist in removal. (No photos of these unfortunately, rotator controller pic only).

As usual, the best way to bid for an item is to turn up in person. If for some pressing reason a WARG member cannot attend the AGM in person but are interested in bidding, please contact Anthony VK6AXB (via ‘Secretary AT warg etc’ email address) for more information on submitting an absentee bid.

73, and Best Regards,

Anthony VK6AXB

CB-and-Mics HH-Amp Key-Tuner Phones-Filter-Switch Rotator Speaker-Book SWR-Meters TS-680S Whip

 

 

Site visit to Kellerberrin VK6RKN

Monday April 18th happened to be World Amateur Radio Day – and a group of WARG members decided to celebrate the day by travelling to Kellerberrin, about 200km east of Perth, for a day’s work on the VK6RKN repeater site. Trevor VK6MS and myself travelled up from Perth, Peter VK6PK joined us along the way from Wooroloo, and we met Bruce VK6LAW and Pete VK6FUN on site at the repeater.

This site had previously suffered a lightning strike, which did significant damage and put the 2m repeater off air. Whilst partial work had been done to restore the service, it hadn’t been previously possible to climb the mast and replace damaged antennas and feedlines. This was the main aim of the working party, and thanks to our combined effort – and particularly the work of Trevor VK6MS – we had great success on the day.

WARG recently was fortunate to obtain a donation of high quality low-loss antenna cable (LDF4-50 equivalent) from David, ex-VK6NFH. Prior to the working bee this was prepared and checked ready for transport to site and installation. Ray VK6ZRW had previously retuned the cavities, and a replacement antenna and the repaired repeater/cavities had already been transported to site and installed on test, thanks to the previous efforts of VK6PK, VK6FUN and Colin VK6ACT. A new UHF CB antenna was already on site courtesy of the shire, who had asked if we could investigate the CB repeater performance in consideration of WARG’s site access for the 2m repeater.

On the day, Trevor VK6MS scaled the 45m mast, and with the rest of us as ground crew, we removed and lowered the faulty 2m and UHF CB antennas, hoisted the new feedline aloft, and fitted replacement antennas, including a stacked phased-array dipole for the UHF CB, and a dual-band X-300 Diamond for WARG usage. The CB phased-array is all stainless-steel welded construction, and sits atop the mast, offering a greater degree of lightning protection in future. The WARG dual-band sits on an outrigger about a metre or so below the mast top, hopefully out of the firing line, whilst still achieving good height for coverage. The new feedline is secured with stainless cable ties and earthed top and bottom to the mast. At ground level the feedline entry point to the hut was improved with a new gland plate being fabricated and installed, along with a lightning arrestor at the entry point, and new internal cabling to the repeater and APRS equipment.

Due to the fading daylight, there was not time for a full spec-check and investigation of the repeater and APRS functions, but on a quick test, all was working to a reasonable standard. Mobile tests on the homeward journey showed the repeater coverage now extending westwards to Cunderdin and north to Baandee, with base stations in Merredin also being able to work VK6RKN. (On the down side, the coverage in the Perth Hills seems to have dropped off…but I would say that is outweighed by the local improvements…)

A big thank you to VK6MS for the climbing, and to Bruce VK6LAW, who used his local contacts to solve a number of problems on the day. Thanks are also due to VK6FUN, VK6PK and all others who donated time, effort or materials to make the day a success.

There is still work to be done – the APRS antenna (Diamond 2m colinear at about 15m level) is showing high SWR, which needs investigation, although the APRS is still working OK by all reports. The repeater’s RX mute setting is a bit high, and it still seems to be de-sensing on weaker signals at the fringes – plus the internal hut cabling could do with a bit of tidying up. All tasks for a future working bee…to be scheduled.

Reports on the coverage and performance of the repeater,  and APRS service would be appreciated, either on-air during WARG’s Sunday net;  via email, to secretary AT whisky alpha romeo golf DOT org DOT au – or come along to a WARG meeting and tell us about it!

73, and Best Regards,

Anthony VK6AXB
Secretary, WARG

Working Bee – VK6RTH (Tic Hill) 15-05-2015

Working Bee – VK6RTH – 15-05-2015.

A short notice to members just reminding all that a working bee has been scheduled for Tic Hill, by Site Manager Bob VK6POP. The Bee is scheduled for Friday May 15th 2015, Meeting is at 0930, Liason Frequency for the morning will be the star of the day, Tic Hill (146.800). If you are planning on attending to assist, please notify Bob via the reflector.

A number of tasks require attention including installation of solar panels (if anyone is able to climb a mast, please contact Bob), installation of a regulator, servicing of the batterys and a general site cleanup and tidy.

For those who haven’t attended a site working bee for a while, or who haven’t been to the Tic Hill site, the information below refers:

WARG will appoint team leaders or co-ordinators for the working bee to ensure everyone goes home safely – these person/s will be identified to you on the day, please follow their instructions.

The repeater site is on private land, and prior permission is required for access. No entry for pets or other animals. Leave all gates as found, and take care not to disturb livestock, damage any crop or contaminate water supplies (eg: no hand washing in stock troughs or similar). Even though it is a lower risk time of year, fire precautions should also be taken. All rubbish and waste items must be removed from the site at the conclusion of the works.

The repeater site itself is not readily accessible by 2WD vehicle. Therefore arrangements will need to be made with the working team beforehand so everyone has suitable transport from the base of the hill to the site if required.

The site is unattended, with no toilets or other facilities of any kind. It is your responsibility to bring with you everything you will need for the day, including food, and water for drinking & washing, etc. There is little indoor space to shelter from the elements, so hats, sunglasses & sunscreen, or rain wear etc should be carried, depending on the weather forecasts. Other personal protective equipment (PPE) such as boots, hardhat, gloves, safety glasses, earplugs etc may be required, depending on the work we are doing – if you have your own PPE, please bring it along. Likewise bring a first aid kit if you have one, although some first aid supplies will be available on site.

The site is shared with other users, and their equipment & presence must be respected. Keep the usual distance from antennas and equipment you are not familiar with. Some structures on the site may contain asbestos, the usual precautions should apply here. Radio masts shall only be climbed by appropriately qualified or experienced people with the correct safety equipment.

The site is in a scrub/bushland setting, and – especially in summer – care must be taken not to do anything which may start a fire. Extra care must be taken with the use of gas soldering irons, power tools, or clearing work likely to cause sparks. Smokers should be especially careful – or preferably, quit! (At least for the day…)

In addition there may be the usual hazards associated with bushland, including spiders & snakes – wear long pants and closed shoes, preferably safety boots. Take care when moving near bush areas.

Besides your tool box, multimeter, SWR meter and handheld radios, useful items to bring to a repeater site working bee could include: insect spray; stepladder & garden tools for trimming tree limbs and clearing scrub from guy wires; rags, brushes and cleaners for removing dust from equipment; camera & notepad for documenting things; heavy cable ties, black electrical tape, silastic sealant; coax joiners & adaptors…. this list is not exhaustive. In the end, what you bring to a working bee is limited only by your transport, imagination and what’s in your shack – but remember it is your responsibility for keeping track of items you bring to site, and making sure you get them back at the end of the day.

Pets & small children should not be part of a working bee. If you are caring for children and have no choice but to bring them, it is your responsibility to supervise them, keep them out of harm’s way, and prevent them becoming a risk to others.

West Australian Repeater Group
May 2015

Fusion Presentation – 1/12/2014

For our upcoming meeting on Monday December 1, Will VK6UU has kindly agreed to bring along his Fusion equipment and give a presentation about the Fusion system.

This will be a good opportunity to have a close look at this new digital voice protocol, and compare/contrast to other systems. We encourage as many members as possible to turn up.

Usual venue, Peter Hughes Scout Communications Centre, cnr Gibbs St and Welshpool Rd East Cannington. Doors should be open at 7 for a 7:30pm start. We envisage a brief business-meeting session, and then hand over to Will for the presentation. Any other general meeting items can be dealt with after the presentation, if needs be.

This will be our last meeting before Christmas, and a good chance for a catch up generally. There is no meeting scheduled in January due to the proximity to Christmas/New Year break and hot conditions, so we won’t be all meeting together again until early February. (Although there should be some working bees and other activities in December/January).

Some videos in relation to the system can be found below. Thanks go to Will VK6UU for his time spent on the new system.

We look forward to seeing you there, to enjoy the presentation, a coffee and possibly even some Christmas Treats.

73